As a result, we deliver factory-direct pricing, consistent fiber quality, and fast delivery. Similarly, this applies to all your furnace, pipe, boiler, and high-temperature equipment insulation projects.
In addition, we produce these single side foil ceramic fiber blankets from high-purity alumina-silicate fiber with a reflective aluminum foil facing on one side. Meanwhile, they comply with ASTM C892 and EN 1094-1. Therefore, engineers and contractors rely on them for thermal insulation where reflective heat protection and low heat storage are critical.
Technical Specifications of Aluminum Foil Faced Ceramic Fiber Blankets
To begin with, we manufacture our foil faced ceramic fiber blankets in a range of densities and thicknesses. Specifically, the table below summarizes the standard product range.
| Parameter | Specification |
|---|---|
| Classification Temperature | 1260°C (2300°F) |
| Max Working Temperature (Fiber) | 1100°C (2012°F) |
| Max Recommended Temperature (Foil Face) | 450°C (842°F) — for cold face or low temperature side |
| Fiber Chemistry | Alumina-Silicate (Al₂O₃ + SiO₂) |
| Chemical Composition | Al₂O₃ 46–48%, SiO₂ 52–54% |
| Density | 96 / 128 kg/m³ |
| Standard Thickness | 20 mm / 25 mm / 38 mm / 50 mm |
| Standard Roll Size | 610 mm × 7200 mm / 1220 mm × 7200 mm |
| Aluminum Foil Thickness | 0.02 – 0.05 mm (optional glass fiber mesh reinforcement) |
| Thermal Conductivity (128 kg/m³) | 0.09 W/m·K (400°C) / 0.16 W/m·K (800°C) |
| Permanent Linear Shrinkage | ≤ 2.5% (1100°C × 24h) |
| Tensile Strength (128 kg/m³) | ≥ 70 kPa |
Material & Physical Specifications for Foil Faced Fiber Wool Rolls
- To begin with, we use high-purity alumina-silicate fiber as the base for our foil faced ceramic fiber blankets. The fiber is produced by melting and blowing or spinning, then needle-punched to form a flexible blanket.
- Moreover, we laminate a reflective aluminum foil facing to one side of the blanket. The foil reflects radiant heat and acts as a vapor barrier.
- Additionally, our foil faced blankets have a density of 96 kg/m³ or 128 kg/m³. We also supply 160 kg/m³ on request.
- Furthermore, the aluminum foil facing is available with glass fiber mesh reinforcement for added tear resistance and durability.
- For special orders, we supply double side foil and wire mesh reinforced ceramic fiber blankets for enhanced surface protection.
- Finally, we offer OEM & ODM — we customize density, thickness, width, length, foil type, and packaging according to your specifications.
Why Choose Aluminum Foil Faced Ceramic Fiber Blankets?
In fact, the aluminum foil facing adds a reflective function to the ceramic fiber blanket. Furthermore, it reduces radiant heat loss and provides a clean, durable surface.
- First, our blankets offer reflective heat insulation. The aluminum foil reflects radiant heat back toward the hot source, improving overall thermal efficiency.
- Second, they provide low thermal conductivity. The fiber structure reduces heat loss and improves energy efficiency in furnaces, pipes, and boilers.
- Third, they deliver low heat storage. The low density means less heat is absorbed by the lining, allowing faster heat-up and cool-down cycles.
- Fourth, they ensure excellent thermal shock resistance. The flexible fiber structure withstands rapid temperature changes without cracking.
- Finally, they provide vapor barrier protection. The foil facing resists moisture migration and protects the fiber from contamination.
Applications & Industries for Foil Faced Ceramic Fiber Blankets
- For instance, in industrial furnaces, our blankets provide backing insulation with reflective foil facing for temperatures up to 1260°C.
- Also, in pipe and duct insulation, they wrap high-temperature pipes and flues with a reflective vapor barrier.
- In addition, for boilers and process heaters, they insulate walls, roofs, and doors to reduce heat loss.
- Furthermore, in expansion joints, they fill gaps and accommodate thermal movement in refractory linings.
- Lastly, in marine and offshore applications, they provide thermal and acoustic insulation with a reflective foil surface.
About Our Factory — Direct Manufacturer of Foil Faced Ceramic Fiber Blankets
In fact, Tarco Industry operates a modern manufacturing facility. Specifically, we dedicate it to the production of foil faced ceramic fiber blankets and high-temperature insulation products.
Furthermore, we complete every step in our own factory. This includes raw material melting, fiber blowing, needle punching, foil lamination, heat treatment, and packaging. Consequently, we do not outsource production. We do not act as a middleman.
In addition, we equip our factory with advanced melting furnaces and automated foil lamination lines. As a result, we produce high-quality foil faced ceramic fiber blankets with consistent fiber diameter, uniform density, and reliable reflective performance.
Therefore, whether you need standard 1260°C blankets or custom configurations, Tarco Industry can produce them directly for you.
Factory Direct Advantages
- First, we are a Manufacturer, Not a Trader. You buy directly from Tarco Industry production lines, eliminating middleman markups.
- Second, we handle In-House Production. We produce fiber, blankets, and foil facing all under one roof for full quality control.
- Third, we welcome OEM & ODM. We customize density, thickness, width, length, foil type, and packaging.
- Fourth, we maintain Bulk Production Capacity. We ensure stable output for large furnace and pipe insulation projects.
- Finally, we provide Factory Price. We offer competitive direct pricing for distributors, refractory contractors, and OEMs.
How to Install Aluminum Foil Faced Ceramic Fiber Blankets
- First, prepare the surface. Clean the furnace or pipe shell to remove dust, oil, and loose material.
- Then, cut the blanket. Use a sharp knife or scissors to cut the blanket to the required size. Cut from the fiber side to avoid damaging the foil.
- Next, position the blanket. Place the blanket with the aluminum foil facing the cold side or air space. The foil reflects radiant heat back toward the hot source.
- After that, attach the blanket. You can impale the blanket onto ceramic anchors, or use high-temperature adhesive. Overlap joints by 50 mm to ensure a tight seal.
- Finally, secure the blanket. Use stainless steel wire, ceramic rope, or mechanical fasteners to hold the blanket in place. Seal joints with aluminum foil tape if required.
Quality Assurance & Certifications
Furthermore, Tarco Industry manufactures our foil faced ceramic fiber blankets under strict quality control. Specifically, they comply with ASTM C892, EN 1094-1, and ISO 10635 standards.
As a result, we perform density testing, tensile strength testing, thermal conductivity testing, linear shrinkage testing, and foil adhesion testing. Moreover, we test every production batch before shipment.
- Additionally, we offer certifications including ISO 9001, CE, and SGS.
- Similarly, our production capacity reaches 500 tons per month.
- Also, we set the MOQ at 1,000 kg (negotiable for sample orders).
- In terms of packaging, we offer plastic bags inside cartons or woven bags, on pallets with custom marking.
- Finally, we deliver within 15–20 business days after order confirmation.
Request a Quote for Aluminum Foil Faced Ceramic Fiber Blankets
In conclusion, we are Tarco Industry. We are a direct manufacturer of aluminum foil faced ceramic fiber blankets and reflective high-temperature insulation products.
Therefore, because we produce in our own factory, we offer competitive factory-direct pricing. In other words, you deal with no middleman and no trading company markup.
📩 Contact Tarco Industry now for a free sample or bulk quotation. Additionally, our engineering team can assist you in selecting the right density, thickness, foil type, and packaging for your specific furnace, pipe, or boiler application.
Tarco Industry — We Produce, We Manufacture, We Supply Directly.
